THE CREATION OF
Our Barcodes
The Process
Our Barcodes are generated using a specialised software, thus allowing us full control of how the barcode reads
Once you’ve placed your order, we’ll start generating your secqeunce of barcodes and begin printing. This process involves the use of our ceramic printing systems.
Time Management
Under normal circumstances we can complete your order of ceramic barcodes within a week depending on the size of the order.
Checking
A vigorous amount of checking occurs during multiple stages throughout the creation of your barcodes.
Customer Care
You can contact us with any questions or concerns you may have, we have many lines of contact.
Team Management
Over 10 people have a part in the ceramic barcode process to make sure the quality of every barcode is consistant.
Product Features
Xerital’s High Temperature Barcodes can be used on a variety of ceramic articles which are fired up to 1250ºC. Xerital produces bespoke barcodes and markings to suit indivdual requirements.
Colour logos can be incorporated into the label design.
Barcodes can be supplied to give a glaze free finish or alternatively for overglazing with clear or transparent glaze.
Easy to Read Barcodes
QR codes available
Very Permanent
Tracksan Tracking Technology
Barcode tracking system for ceramic production
Tracksan is a production tracking system for sanitaryware and other ceramic production. The fully integrated technology allows for the complete monitoring and tracking of the production using barcodes.
Clients have found that significant loss reduction can be achieved following the installation of a Tracksan system. It is a modular system allowing new clients to begin their production tracking at a basic level, which can be added to as more data is required.
In its simplest form, barcodes are applied and scanned after casting and the pieces are then scanned again on final inspection. Defects identified can be attributed to the individual item and referenced with the casting process. A touch screen is commonly used at this point and the position of the defect can also be assigned to each piece.
It is important to gather as much information about the production process in order to identify the causes of the faults. At the casting stage all the moulds are identified with their own barcode which is scanned together with the barcode applied to the piece. Operators will have their own unique id or barcode which will be entered into the system at the start of the day. For additional production information, scanning systems can be incorporated at each stage of the process such as drying, fettling, spray glazing, firing (kiln & position) and reprocessing.
The numbers
Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit laborum. Sed ut perspiciatis unde omnis iste natus sit voluptatem accusantium doloremque laudantium totam rem aperiam, eaque ipsa quae ab illo inventore veritatis et quasi architecto beatae vitae dicta sunt explicabo ipsum quia dolor sit amet qui dolorem.
- Conversion Rate – 90%
- Return CUSTOMERS – 100%